Full Visual Survey
We inspect the attic, crawl space, basement, HVAC, bathrooms, kitchen, and laundry areas. Every room gets checked for water staining, visible growth, and conditions that support mold.
Every real estate mold assessment includes the core inspection, moisture mapping, thermal imaging, and air sampling. Additional services like ERMI testing, mycotoxin testing, and post-remediation clearance are available as add-ons depending on the transaction.
We inspect the attic, crawl space, basement, HVAC, bathrooms, kitchen, and laundry areas. Every room gets checked for water staining, visible growth, and conditions that support mold.
A Protimeter moisture meter and FLIR thermal imaging camera map wet zones behind walls and under floors. We record readings in the report so your contractor knows exactly where to work.
We collect at least three indoor air samples with Air-O-Cell cassettes plus an outdoor control. Surface growth gets tape lift or swab sampling. Samples ship to EMSL Analytical the same day.
You receive a PDF with photos, moisture readings, lab results, and a remediation protocol if needed. The report is written for agents, lenders, and relocation companies.
When mold is present, we outline a scope aligned with ANSI/IICRC S520. Your contractor bids the same scope we documented, which prevents change orders and keeps negotiations grounded.
Mold Inspection for Real Estate Transactions Fort Worth TX is a documented, lab-supported property evaluation that identifies mold growth, moisture sources, and indoor air quality risks before a home changes hands. We use a Protimeter moisture meter and a FLIR thermal imaging camera to trace hidden water, then collect air samples through Air-O-Cell spore trap cassettes and surface samples via tape lift sampling. Every finding is mapped to its source so your report reads like evidence, not opinion.
Fort Worth sits in a climate that swings from 100-degree summers to hard winter freezes, and that whiplash drives roof leaks, slab leaks, and condensation inside walls. Sellers in Tarrant County often need a pre-sale mold inspection Fort Worth TX before the buyer's option period expires, and buyers want proof the HVAC and crawl space are clean. We handle both sides of the transaction with the same standard.
Five steps from first call to final report. Most properties take two to four hours on site, and you get the written assessment within one business day.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Protimeter Moisture Meter
Measures moisture content in drywall, wood, and concrete. We use it to confirm active moisture behind walls and under floors.
FLIR Thermal Imaging Camera
Reveals temperature differences that indicate hidden moisture. We pair it with a moisture meter to confirm findings before writing them into the report.
Air-O-Cell Spore Trap Cassettes
Collect airborne mold spores for lab analysis. We run at least three indoor samples plus an outdoor control on every real estate inspection.
Boroscope
Inspects inside walls and cavities without cutting drywall. We use it to confirm what the thermal camera suggests.
Hygrometer
Measures relative humidity. Fort Worth homes often run above 60% indoors, which supports mold growth. We record readings in the report.
Particle Counter
Measures airborne particle concentrations. We use it to identify areas with elevated particulates that may indicate mold or other indoor air quality issues.
ERMI Dust Cloths
Collect settled dust for DNA-based mold analysis. We recommend ERMI testing when air samples are inconclusive or when a historical mold profile is needed.
ANSI/IICRC S520 Standard
The industry standard for mold remediation. We write every remediation protocol to this standard so your contractor bids the same scope we documented.
Tape Lift and Swab Sampling
Surface sampling that identifies mold species on visible growth. We use tape lift for dry surfaces and swab sampling for wet or irregular areas.
Moisture Mapping
We combine moisture meter readings with thermal imaging to map wet zones. This identifies the source, not just the symptom, so remediation targets the right area.
Air Sampling with Outdoor Control
We compare indoor spore counts to outdoor levels. If indoor counts exceed outdoor, that indicates an indoor mold source. This comparison is the foundation of our reports.
01
What we do: We schedule same-day or next-day, complete the inspection in 2 to 4 hours, and deliver the report within 24 to 48 hours. That gives your agent time to negotiate before the deadline.
→ You get the documentation you need to request repairs or credits, or to walk away with cause if the problem is serious.
02
What we do: We run a pre-sale mold inspection Fort Worth TX before the listing goes live. The report documents the property's condition and gives you time to address any issues on your schedule.
→ You list with confidence, and buyer inspections are less likely to derail the deal.
03
What we do: We run a full assessment with air and surface sampling, then deliver a report with species identification and spore counts. The documentation replaces speculation with facts.
→ You can show the next buyer exactly what is present and what it takes to fix it.
04
What we do: We inspect the crawl space or basement, map moisture, and sample the air. The report identifies any growth and the moisture source driving it.
→ You know what you are buying before you close, and you can negotiate repairs or credits with real numbers.
Fort Worth's climate swings hard. Summers push 100 degrees with high humidity, and winter freezes crack pipes and drive water into walls. That cycle creates mold problems in attics, crawl spaces, and HVAC systems across Tarrant County. Older homes in Fairmount and Ryan Place often have original plumbing and poor ventilation, while newer builds in Eastchase can have HVAC mold from oversized systems running short cycles. When you need a real estate mold assessment Fort Worth TX, we schedule around your closing timeline and deliver reports that satisfy lenders and relocation companies. If you are searching for a real estate mold assessment near me Fort Worth TX 24/7, we offer same-day appointments for active transactions.
Fairmount
1920s bungalows with original plumbing and pier-and-beam foundations. Crawl space moisture and slab leaks are common, and we inspect both on every assessment.
Ridglea
Mid-century homes with mature trees that drop debris on roofs. Roof leaks drive attic mold, and we check decking and rafters on every inspection.
Eastchase
Newer construction with tight envelopes and oversized HVAC systems. Short cycling traps humidity, and we inspect coils and drain pans for mold growth.
Arlington Heights
Older homes with finished attics and limited ventilation. We check soffit and ridge vents and sample the air when growth is suspected.
Tanglewood
Larger homes with multiple HVAC zones. We inspect each air handler and sample the air stream when mold is suspected in any zone.
Summer humidity above 60% indoors
High indoor humidity supports mold growth on cool surfaces like AC vents and exterior walls. We measure humidity with a hygrometer and recommend dehumidifiers or ventilation fixes.
Winter freeze events that crack pipes
Freeze-thaw cycles drive water into walls and under floors. We use thermal imaging and moisture meters to find hidden moisture before it becomes mold.
Slab leaks in older homes
Slab leaks push water up through flooring and into walls. We trace moisture with a Protimeter meter and thermal camera to identify the source.
Roof leaks from storm damage
Fort Worth hail and wind storms damage roofs and drive water into attics. We inspect decking and insulation for moisture and growth on every assessment.
Mold can kill a deal or cost you thousands in credits. We document what is actually there so you can negotiate from facts, not fear.
Problem
Without lab results, the buyer assumes the worst and demands a large credit or walks away. The seller loses leverage and the deal stalls.
Our Fix
We run air and surface samples, get lab results in 24 to 48 hours, and deliver a report that shows exactly what is present and what it will take to fix. Both sides negotiate from the same facts.
Problem
Buyers see the disclosure and assume mold is still active. The listing sits, and the seller drops the price to move it.
Our Fix
We inspect the repaired area, run moisture readings, and sample the air. If the repair was done correctly, the report proves it. If mold is still present, we scope the fix so the seller can address it before closing.
Problem
Crawl space mold scares buyers because they cannot see it. Without a clear scope, the buyer's agent asks for a blanket credit that exceeds the actual repair cost.
Our Fix
We inspect the crawl space, map moisture, and sample the air. The report identifies the source, the extent, and the remediation scope, so the credit negotiation is based on real numbers.
Problem
HVAC mold spreads spores through the entire home. If it is not confirmed, the buyer may walk or demand a full system replacement.
Our Fix
We inspect coils, drain pans, and ductwork, then sample the air stream. If mold is present, we document it. If it is not, the report clears the system and the deal moves forward.
A real estate mold assessment is only useful if it holds up under scrutiny. Our reports are written for agents, lenders, and relocation companies who need answers fast.
Protects Your Closing Date
Most transactions give you 7 to 10 days for inspections. We schedule same-day mold inspection for real estate Fort Worth Texas appointments and deliver lab results in 24 to 48 hours, so you are never the reason a closing slips.
Lab-Backed Documentation
We send spore trap cassettes and tape lift samples to EMSL Analytical and Mycometrics for analysis. You receive a written protocol with species identification, spore counts, and moisture readings that satisfy lenders, appraisers, and relocation companies.
Finds Hidden Moisture
A FLIR thermal imaging camera reveals temperature differences behind drywall, under flooring, and inside ceilings. We pair that with a Protimeter moisture meter and a boroscope to confirm what the camera suggests before we write it into the report.
Clear Remediation Scope
When mold is present, we outline a remediation protocol aligned with ANSI/IICRC S520 so your contractor bids the same scope we documented. That prevents change orders and keeps the repair credit negotiation grounded in real numbers.
Google ★★★★★4.9
Fast, professional, and thorough. They inspected our crawl space, ran air samples, and had the report to us in 24 hours. Our agent said it was the clearest mold report she had seen. Closed on time.
Yelp ★★★★★4.8
We were under contract on a home in Fairmount and needed a mold inspection fast. They scheduled same-day, walked us through everything, and delivered a report that satisfied our lender. Highly recommend.
BBB ★★★★★4.9
Honest and detailed. They found a slab leak that two other inspectors missed and documented it with photos and moisture readings. The report saved us thousands in negotiation.
Google ★★★★★5.0
I am a real estate agent and I use Fort Worth Mold Testing for all my listings. Their reports are clear, fast, and written for the people who have to act on them. They have never missed a deadline.
Our inspectors hold ACAC and IICRC credentials and work to ANSI/IICRC S520 standards on every job. We have walked thousands of Fort Worth properties, from 1920s bungalows in Fairmount to new builds in Eastchase. We know how Tarrant County homes fail, where builders cut corners, and which neighborhoods see the most slab leaks and HVAC mold. That local pattern recognition is why agents call us first when a deal is on the line.
Real answers to the questions we hear most often from local homeowners and property managers.
A full visual and moisture survey of the property. Real estate transactions often start here when the buyer or seller needs a general assessment before deciding on sampling.
View Mold InspectionAir and surface sampling with lab analysis. We use Air-O-Cell cassettes and tape lift sampling to confirm species and spore counts for your real estate report.
View Mold TestingIndoor air sampling that measures spore concentrations against outdoor controls. This is often the fastest way to document whether a property has a mold problem.
View Air Quality TestingWe use a Protimeter moisture meter and thermal imaging to map wet zones behind walls and under floors. This step identifies the source, not just the symptom.
View Moisture Mapping and DetectionA FLIR thermal imaging camera reveals temperature differences that indicate hidden moisture. We pair it with a boroscope to confirm findings before writing them into the report.
View Thermal Imaging InspectionWhen mold is present, we write a remediation scope aligned with ANSI/IICRC S520. Your contractor bids the same scope we documented, which prevents change orders.
View Mold Remediation ProtocolCall (866) 896-8166 or email info@fortworthmoldtesting.com and we will get you on the schedule. We answer calls Monday through Friday from 8am to 6pm and run emergency response for water damage and post-storm inspections. Most standard inspections are booked within a day or two.
Phone
+18668968166Address
Fort Worth, Texas
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available