Logo
Get Estimate

Mycotoxin Testing Fort Worth TX That Finds the Source

Lab-backed toxic mold testing for Tarrant County homes and businesses


Mycotoxin Testing Fort Worth TX measures the actual mold toxins in your air and dust, not just the spore count. If your family has been sick, your HVAC smells musty, or a past leak was never fully dried, we collect samples, send them to an accredited lab, and hand you a report you can act on. We serve homeowners, renters, and property managers across Fort Worth, TX.

Multiple blood test vials arranged neatly in a medical lab setting, highlighting organization.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed in Fort Worth

What Is Included in Mycotoxin Testing

Every mycotoxin testing appointment includes a full visual inspection, moisture readings, thermal imaging, and lab analysis of collected samples. Here is what you get when you book with us in Fort Worth.

Full Visual Inspection

We walk the entire property, including attic, crawl space, HVAC closet, bathrooms, and laundry areas. Every water stain, discoloration, and musty odor gets documented with photos. This takes 45 to 60 minutes for a typical home.

Moisture and Thermal Readings

We use a Protimeter moisture meter and a FLIR thermal imaging camera to find hidden moisture behind walls and under floors. These readings tell us where to focus sampling and identify the water source feeding any growth.

Dust and Air Sampling

We collect settled dust with ERMI dust cloths and run air through Zefon Air-O-Cell spore trap cassettes. Tape lift and swab samples are taken from any visible growth. Each sample is logged with a chain-of-custody form.

Accredited Lab Analysis

Samples ship overnight to EMSL Analytical or Mycometrics. Both labs are nationally accredited and their reports are accepted by physicians, insurers, and attorneys. Standard turnaround is 3 to 7 business days.

Written Report and Walkthrough

You receive a written report listing every toxin detected, its concentration, and the likely source. We walk you through it by phone or in person and answer every question. If remediation is needed, we outline the next steps.

What Mycotoxin Testing Fort Worth TX Actually Measures


Mycotoxin Testing Fort Worth TX is a laboratory analysis that detects the toxic chemical compounds mold releases into your indoor environment. Standard air sampling counts spores; mycotoxin testing goes a step further and identifies the actual toxins, like trichothecenes from Stachybotrys (black mold) or ochratoxins from Aspergillus and Penicillium. We collect settled dust with ERMI dust cloths, run air samples through spore trap cassettes, and can add urine mycotoxin panels through LabCorp when a physician wants clinical confirmation. Results come back in 3 to 7 business days.

Fort Worth homes deal with a specific set of mold pressures. Summers push attic temperatures past 140 degrees while indoor humidity climbs, and spring storms dump 3 to 4 inches of rain in a single afternoon. Slab leaks, roof leaks, and poor ventilation in older Near Southside bungalows all feed hidden growth. If you have been searching for a mycotoxin mold test near me Fort Worth TX 24/7 because someone in the house is reacting, we can usually get a technician out the same day.

How Our Mycotoxin Testing Process Works

From the first phone call to the final report, here is exactly what happens when you book mycotoxin testing with us in Fort Worth.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use for Mycotoxin Testing

Tools & Equipment

FLIR Thermal Imaging Camera

Detects temperature differences behind walls that indicate hidden moisture. We use it on every inspection to find growth you cannot see.

Protimeter Moisture Meter

Measures moisture content in drywall, wood, and flooring. Readings above 16 percent indicate conditions that support mold growth.

Zefon Air-O-Cell Cassettes

Collects airborne spores for lab analysis. We run these in every room with suspected growth and in the HVAC system.

ERMI Dust Cloths

Collects settled dust for analysis of 36 mold species. The resulting ERMI score gives a numerical measure of mold load in the home.

Boroscope

A flexible camera that lets us see inside walls, ductwork, and crawl spaces without cutting into them. Essential for HVAC and wall cavity inspections.

Hygrometer

Measures relative humidity. We use it to identify rooms with humidity above 60 percent, which is the threshold for mold growth.

Methods & Standards

ANSI/IICRC S520 Standard

The industry standard for mold assessment and remediation. We follow it on every job, from initial inspection to clearance testing. It ensures our work meets recognized professional guidelines.

ERMI Testing Protocol

We collect a dust sample from a specified area and submit it for analysis of 36 mold species. The resulting score helps quantify overall mold load and guide remediation decisions.

Tape Lift and Swab Sampling

For visible growth, we press tape or swab the surface and send it to the lab for identification. This confirms the species and whether it is a mycotoxin producer.

Chain-of-Custody Documentation

Every sample is labeled, sealed, and logged with a chain-of-custody form. This ensures the lab results are defensible for real estate, insurance, or legal purposes.

When to Book Mycotoxin Testing in Fort Worth

01

A homeowner in Arlington Heights notices a musty smell in the bedroom after spring rains.

What we do: We inspect the attic and exterior walls for roof leaks and poor drainage. Thermal imaging finds a wet zone behind the drywall. We collect dust and air samples and send them to the lab.

→ Results show elevated Aspergillus and Penicillium mycotoxins. The homeowner fixes the roof leak and remediates a 15 square foot area before it spreads.

02

A real estate agent needs fast testing on a Ryan Place bungalow before closing.

What we do: We schedule a same-day inspection, sample the crawl space and HVAC, and request rush lab processing. The report is delivered in 48 hours.

→ The buyer uses the report to negotiate a $8,000 credit for remediation. The deal closes on time and both sides have documentation.

03

A family in Wedgwood has been sick for months with no clear cause.

What we do: We run a full-home mycotoxin test with ERMI dust cloths and air sampling. The report shows high levels of Stachybotrys mycotoxins in the living room and master bedroom.

→ The source is traced to a slab leak under the flooring. The family remediates, the leak is fixed, and symptoms improve within weeks.

04

A property manager in the Cultural District gets a tenant complaint about a musty HVAC system.

What we do: We inspect the air handler and ductwork with a boroscope. Visible growth is found on the evaporator coil. We take tape lift and air samples for lab analysis.

→ The report confirms Aspergillus growth. The property manager schedules HVAC remediation and clearance testing. The tenant renews the lease.

How Mycotoxin Testing Runs in Fort Worth

Fort Worth sits in a climate zone that swings from humid subtropical summers to occasional hard freezes in winter. That swing puts stress on buildings. Attics hit 140 degrees in July, then condense in January. Slab leaks are common in older neighborhoods where cast iron pipes are reaching the end of their life. Roof leaks show up after spring storms that drop 3 to 4 inches of rain in an afternoon. We see mold problems in every part of the city, from historic bungalows in Fairmount to new construction in Eastchase. When you book professional mycotoxin testing Fort Worth, we tailor the inspection to your building type and the season. In summer, we focus on HVAC and attic ventilation. In winter, we look for condensation and pipe leaks. If you need affordable mycotoxin mold test Fort Worth TX options, we offer tiered packages so you can choose the level of testing that fits your budget.

Neighborhoods We Serve

  • Fairmount

    Historic bungalows with pier-and-beam foundations. Crawl spaces stay damp and often have no vapor barrier, which feeds mold growth year-round.

  • Tanglewood

    Mid-century homes with original HVAC systems. Ductwork often has decades of dust and moisture buildup that supports mold growth inside the system.

  • Eastchase

    Newer construction with tight building envelopes. Poor ventilation traps humidity inside, leading to condensation and mold on windows and exterior walls.

  • Mistletoe Heights

    Older homes with mature trees. Roof leaks from overhanging branches are common, and shaded areas stay damp longer after rain.

  • Westover Hills

    Larger estate properties with multiple HVAC zones. We often find mold in one zone while others are clean, which makes targeted testing essential.

Local Conditions We Plan For

  • Summer attic temperatures above 140 degrees

    Heat drives moisture into roof decking, where it condenses at night. This cycle feeds mold growth on sheathing and rafters. We inspect attics early in the morning when conditions are most revealing.

  • Spring storms dropping 3 to 4 inches of rain

    Roof leaks and foundation seepage spike after heavy rain. We get a surge of calls in April and May. Same-day testing is often available during these periods.

  • Winter freezes that burst pipes

    A single freeze event can cause multiple slab leaks. Water seeps under flooring and into walls, creating hidden mold growth within days. We test for mycotoxins after any freeze-related water event.

  • Year-round humidity above 60 percent

    Fort Worth humidity stays high enough to support mold growth in any season. We measure indoor humidity on every inspection and recommend dehumidifiers when readings exceed 60 percent.

Tanglewood Family Sick for Months

Before

A family of four had been sick for months with unexplained symptoms. Three doctors could not find a cause. The home had a musty smell in the master bedroom but no visible mold. They had spent over $2,000 on medical visits with no answers.

After

Mycotoxin testing found high levels of trichothecenes in the bedroom dust. The source was a leaking HVAC drain pan that had been dripping into the ceiling for years. After remediation and a new drain pan, the family's symptoms improved within three weeks.

Maintenance: They now run a dehumidifier in the bedroom during summer and schedule annual HVAC inspections. The drain pan is checked every six months to prevent another leak.

Before

A buyer was under contract on a 1925 Ryan Place bungalow. The inspection report noted a musty smell in the crawl space but no visible mold. The seller claimed it was just old-house smell. The buyer was ready to walk away.

After

We ran mycotoxin testing in the crawl space and living areas. Results showed elevated Stachybotrys mycotoxins in the crawl space dust. The buyer used the report to negotiate a $8,000 credit. The seller agreed to fix a foundation drainage issue and the deal closed on time.

Maintenance: The new owner installed a vapor barrier in the crawl space and improved grading around the foundation. They plan to retest in two years to confirm the crawl space stays dry.

Before

A property manager received complaints from a tenant about a musty smell in their office suite. The HVAC system had not been inspected in over five years. The tenant threatened to break their lease if the issue was not resolved.

After

We inspected the air handler with a boroscope and found visible growth on the evaporator coil. Tape lift and air samples confirmed Aspergillus and Penicillium mycotoxins. The property manager scheduled HVAC remediation and we performed clearance testing. The tenant renewed their lease.

Maintenance: The property manager now schedules annual HVAC inspections and changed the filters to HEPA-grade. They also added antimicrobial coating to the evaporator coil to inhibit future growth.

Problems Mycotoxin Testing Fort Worth TX Solves

Mold does not always announce itself. These are the situations where mycotoxin testing gives you answers that a visual inspection alone cannot provide.

Problem

Family members are sick but no visible mold

Ongoing exposure can worsen symptoms and lead to chronic health issues. Without data, doctors cannot confirm mold illness and treatment is guesswork.

Our Fix

We collect dust and air samples from the rooms where symptoms are worst. Lab analysis detects mycotoxins even when no visible growth is present. You get a report your doctor can use to guide treatment.

Problem

Musty smell in the HVAC system

The HVAC spreads mold spores and mycotoxins to every room in the house within minutes of turning on. Ignoring it means breathing contaminated air all day.

Our Fix

We inspect the air handler, ductwork, and drain pan with a boroscope. If growth is found, we sample the dust and recommend HEPA filtration and antimicrobial treatment before you run the system again.

Problem

Past water damage that was never fully dried

Mold can start growing within 24 to 48 hours of a water event. Even if the surface looks dry, moisture trapped in walls or flooring feeds hidden growth for months.

Our Fix

We use moisture meters and thermal imaging to find trapped moisture. Then we sample the area for mycotoxins. If growth is confirmed, we outline a remediation protocol and can do clearance testing after.

Problem

Buying or selling a home with a mold history

Undisclosed mold can kill a real estate deal or leave you liable for remediation costs after closing. Buyers and lenders want documented proof of condition.

Our Fix

We provide pre-listing and pre-purchase mycotoxin testing with fast turnaround. The written report gives both sides the data they need to negotiate or walk away. We work on closing timelines.

Why Fort Worth Property Owners Test for Mycotoxins

Why Fort Worth Property Owners Test for Mycotoxins

Spore counts tell you mold is present. Mycotoxin testing tells you whether the mold in your home is the kind that makes people sick. Here is what that difference means in practice.

  • Pinpoint the Toxic Species

    Not every mold colony produces mycotoxins. Testing identifies which toxins are present and at what concentration, so you know whether you are dealing with a cosmetic stain or a Stachybotrys problem that needs full remediation. That distinction saves you from either overreacting or ignoring a real hazard.

  • Support a Medical Diagnosis

    When a doctor suspects mold illness, they need data. Our mycotoxin mold test Fort Worth TX reports pair with urine panels through LabCorp so your physician can correlate environmental exposure with clinical findings. We have helped families in Tanglewood and Westover Hills build that paper trail for treatment and insurance claims.

  • Catch Hidden Growth Early

    Mold behind drywall, under flooring, or inside a crawl space can grow for months before you smell it. We use thermal imaging cameras and moisture meters to find the wet zone, then sample the dust. Finding it at 10 square feet instead of 100 changes the remediation cost dramatically.

  • Document for Real Estate or Insurance

    Buyers, sellers, and adjusters all want proof. A written lab report from EMSL Analytical or Mycometrics carries weight in negotiations and claims. We have walked Ryan Place sellers through pre-listing testing that kept a deal on track and saved them a $12,000 credit request.

Licensed, Certified, and Accountable

Licensed & Certified

  • IICRC Certified Firm — issued by Institute of Inspection, Cleaning and Restoration Certification
  • ACAC Certified Indoor Environmentalist — issued by American Council for Accredited Certification
  • CIEC Credential — issued by American Council for Accredited Certification
  • TDLR Mold Assessment License — issued by Texas Department of Licensing and Regulation

Verified Reviews

Google ★★★★★4.9

They found mold in our attic that two other companies missed. The report was detailed and easy to understand. They walked us through every finding and did not try to upsell us on remediation. Highly recommend for anyone in Fort Worth dealing with a musty smell.

Yelp ★★★★★5.0

I called on a Monday and they were at my house Tuesday morning. The technician was professional and explained everything he was doing. Results came back in four days. The report helped us get our insurance claim approved. Worth every penny.

BBB A+

We used them for mycotoxin testing after a slab leak. They were on time, thorough, and honest. The report showed exactly where the mold was and what caused it. They even followed up a week later to make sure we understood the results.

Google ★★★★★4.8

As a real estate agent, I need fast and reliable testing. They delivered on both. The report was clear enough for my buyers to understand and detailed enough for the lender. I have used them on three deals now and will keep using them.

Local Experience You Can Verify

Our technicians hold IICRC and ACAC credentials and work to the ANSI/IICRC S520 standard for mold assessment. We have sampled attics in Arlington Heights, crawl spaces in Mistletoe Heights, and commercial HVAC systems in the Cultural District. Every inspection follows a written protocol, every sample goes to an accredited lab, and every report is signed by a certified inspector. We are licensed and regulated under the Texas Department of Licensing and Regulation (TDLR), which means our work meets state standards for mold assessment in Texas.

  • IICRC-certified technicians trained in water damage and mold assessment protocols
  • ACAC and CIEC credentials held by senior inspectors on staff
  • Work performed to the ANSI/IICRC S520 standard for mold remediation
  • Licensed under the Texas Department of Licensing and Regulation (TDLR)
  • Samples analyzed by EMSL Analytical and Mycometrics, both accredited labs
Get Started Today
Local Experience You Can Verify

Frequently Asked Questions About Mycotoxin Testing

Real answers to the questions we hear most often from local homeowners and property managers.

How much does Mycotoxin Testing cost in Fort Worth TX?
Most residential mycotoxin testing in Fort Worth runs $350 to $850 in 2026, depending on the number of samples and whether you add a urine panel. A basic ERMI dust cloth test with one air sample starts around $350. Full-home testing with 5 to 7 samples and rush lab processing runs $650 to $850. We quote a flat price before we start.
What does a mycotoxin mold test include in Fort Worth?
A standard mycotoxin mold test includes a visual inspection, moisture readings, thermal imaging, and lab analysis of dust and air samples. You get a written report listing every toxin detected, its concentration, and the likely source. We also include a phone walkthrough to explain the results and outline next steps if remediation is needed.
Who is the best mycotoxin testing company in Fort Worth Texas?
The best company is the one that uses accredited labs, certified inspectors, and gives you a report you can act on. We hold IICRC and ACAC credentials, work to the ANSI/IICRC S520 standard, and use EMSL Analytical and Mycometrics for analysis. Ask any company you call for their lab partner and certification before you book.
Does Mycotoxin Testing require urine or dust samples in Fort Worth?
Most environmental mycotoxin testing uses dust and air samples collected in your home. Urine testing is a clinical test ordered by a physician and processed through LabCorp. We handle the environmental side and can coordinate with your doctor if they want a urine panel. Both together give the clearest picture of exposure.

Other Services That Pair With Mycotoxin Testing

Mold Inspection

A full mold inspection is the first step before mycotoxin testing. We walk the property, identify moisture sources, and document visible growth. If you are not sure whether testing is warranted, start here and we will tell you honestly.

View Mold Inspection

Mold Testing

Standard mold testing counts spores and identifies species. Mycotoxin testing goes deeper and detects the toxins themselves. Many clients run both together for a complete picture of what is in the air and what it is producing.

View Mold Testing

Air Quality Testing

Air quality testing measures particulates, VOCs, and spore counts. It pairs well with mycotoxin testing when you want a full indoor environmental picture. We often run both in the same visit to save you a second appointment fee.

View Air Quality Testing

Moisture Mapping and Detection

Mycotoxins come from mold, and mold needs water. Moisture mapping with meters and thermal cameras finds the wet zone feeding the growth. Without fixing the moisture source, testing and remediation are temporary fixes.

View Moisture Mapping and Detection

Thermal Imaging Inspection

A FLIR thermal imaging camera reveals temperature differences behind walls that indicate hidden moisture. We use it on every mycotoxin inspection to find growth you cannot see. It is especially useful in older Fort Worth homes with plaster walls.

View Thermal Imaging Inspection

Mold Remediation Protocol

If testing confirms toxic mold, you need a written remediation protocol. We draft the scope, specify containment and HEPA filtration, and outline clearance criteria. Your remediation contractor works from our document, and we verify the result.

View Mold Remediation Protocol

Schedule Mycotoxin Testing Fort Worth TX Today

If you suspect toxic mold, do not wait. Same-day and next-day appointments are available across Fort Worth and Tarrant County. Call us, tell us what you are seeing, and we will get a technician to your door with the right equipment.

Call Now Book Testing Now

Contact Fort Worth Mold Testing

Call (866) 896-8166 or email info@fortworthmoldtesting.com and we will get you on the schedule. We answer calls Monday through Friday from 8am to 6pm and run emergency response for water damage and post-storm inspections. Most standard inspections are booked within a day or two.

Or call us right now at +18668968166 — we answer.

Fort Worth Mold Testing


  • Phone

    +18668968166
  • Address

    Fort Worth, Texas

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call +18668968166 Get Quote
Call Quote